YES Presents simple and effective Advanced Resonant Plasma Technology Solutions for Health

Breath of Health™ Models: ARP-300, ARP-600, ARP-1000

ARP-300 Model

Level 1, 2 and 3

Instant and Pure ARP Tech Plasma Bio Activated H2, and O2 through for BREATHING, WATER, WARM TEAS, WATERY CONSISTENCY ELIXIRS, AND OIL INFUSING.

 

(Portable ABS Plastic Case)

SPE, PEM and ARP Technology

(no waste water chamber needed)

Maximum Output:

H2: 220mL/Min O2: 110 mL/Min RP: Maximum

Usage: 20-60 minutes/once or twice per day or per ones need.
H2 Purity: 99.9999% O2 Purity: 99.9999% 

Level 1: ARP Tech Cell: Plasma CO2 Zn/Quartz (Properties: Immunity, asthma, mental peace promoting, anti viral, etc.)

Level 2: ARP Tech Cell: Plasma 24K Gold/Quartz (Properties: Nervous System support, emotional peace promoting, anti viral, etc.)

Level 3: ARP Tech Cell: Plasma Copper/Quartz (Properties: antibacterial, anti fungal, muscular support, etc.)

H2 Output flow and pressure display.
High pressure protection.
Low water protection.
Water level display.

H2 output flow is fixed.
CE Certified

Power and Voltage: 110V, 220V, or as specified. 50-60 Hz (according to your specification)

Fluctuation Rate of Output Pressure: < 0.001 MPa

Measurements: 

Height: 16 inches, Width: 14 inches, Depth: 16 inches.
Water Consumption: 1 Gal. water produces 5.8 Gal. of H2, will go 7-10 days before adding more water.
Water Requirement: Only use the Dionized or Double Distilled Water (if you have your own water distiller, run the same water twice). 

Note: The water used within the unit generates the ARP Tech Bio Activated H2 or O2 Gas, via Electrolysis, SPE/PEM and ARP Tech; however, this is not the water that you use for drinking. You will use a separate water tube, not the breathing cannula in order to insert into a separate holding vessel filled with the purified drinking water, tea or watery consistency herbal elixirs or oils with the Plasma Bio Activated H2 or O2 Gas.

Weight: 26 lb

Delivery: Approximately 10-14 days after receiving the order.

Warranty: 12 months

Why we do not offer longer Warranty? 

We had many instances when people would overrun the machine without giving it any rest  and we decided that giving too long of a Warranty is too risky for us. However, we must say that our machines are care free and amazingly built to last, an that if there is ever a problem we do our best to troubleshoot with our customer through our qualified technicians. In many years of providing this service we have had only success and satisfied customers. So please do not be concerned about the Warranty. It is very likely that we won't ever hear from you running into any problems with the machine, as long as you follow the correct use, according to our Manual.

GO BACK to Breath of Health™ ARP 300

ARP-600 Model

Level 1, 2 and 3

Instant and Pure ARP Tech Plasma Bio Activated H2, and O2 through for BREATHING, WATER, WARM TEAS, WATERY CONSISTENCY ELIXIRS, AND OIL INFUSING.

(Portable ABS Plastic Case)

SPE, PEM and ARP Technology

(no waste water chamber needed)

Maximum Output: H2:

420 mL/Min O2: 210 mL/Min RP: Maximum
Usage:
20-60 minutes/once or twice per day, or per need. Can be used in clinical setting.
H2 Purity: 
99.9999% O2 Purity: 99.9999%

Level 1: ARP Tech Cell: Plasma CO2 Zn/Quartz (Properties: Immunity, asthma, mental peace promoting, anti viral, etc.)

Level 2: ARP Tech Cell: Plasma 24K Gold/Quartz (Properties: Nervous System support, emotional peace promoting, anti viral, etc.)

Level 3: ARP Tech Cell: Plasma Copper/Quartz (Properties: antibacterial, anti fungal, muscular support, etc.)

H2 Output flow and pressure display.
High pressure protection.
Low water protection.
Water level display.

H2 output flow is fixed.
CE Certified.

Power and Voltage: 110V, 220V, or as specified. 50-60 Hz (according to your specification)

Fluctuation Rate of Output Pressure: < 0.001 MPa

Measurements: 

Height: 16 inches, Width: 14 inches, Depth: 16 inches.

Water Consumption: 1 Gal. water produces 5.8 Gal. of H2, will go 7-10 days before adding more water.

Water Requirement: Only use the Dionized or Double Distilled Water (if you have your own water distiller, run the same water twice). 

Note: The water used within the unit generates the ARP Tech Bio Activated H2 or O2 Gas, via Electrolysis, SPE/PEM and ARP Tech; however, this is not the water that you use for drinking. You will use a separate water tube, not the breathing cannula in order to insert into a separate holding vessel filled with the purified drinking water, tea or watery consistency herbal elixirs or oils with the Plasma Bio Activated H2 or O2 Gas.

Weight: 26 lb
Delivery: Approximately 10-14 days after receiving the order.
Warranty: 12 months

Why we do not offer longer Warranty? 

We had many instances when people would overrun the machine without giving it any rest  and we decided that giving too long of a Warranty is too risky for us. However, we must say that our machines are care free and amazingly built to last, an that if there is ever a problem we do our best to troubleshoot with our customer through our qualified technicians. In many years of providing this service we have had only success and satisfied customers. So please do not be concerned about the Warranty. It is very likely that we won't ever hear from you running into any problems with the machine, as long as you follow the correct use, according to our Manual.

GO BACK to Breath of Health™ ARP 600

ARP-1000 Model

Level 1, 2 and 3

Instant and Pure ARP Tech Plasma Bio Activated H2, and O2 through for BREATHING, WATER, WARM TEAS, WATERY CONSISTENCY ELIXIRS, AND OIL INFUSING.

(Stationary Metal Case)

SPE, PEM AND ARP Technology

(no waste water chamber needed)

Instant Pure H2, O2 and Resonant Plasma in one for BREATHING and DRINKING:

Maximum Output: H2: 837mL/Min O2: 418 mL/Min RP: Maximum

Usage: 20-60 minutes/once or twice per day, or more per your need. It can be used in clinical setting.

Comes with dual Breathing Splitter for two person use at the same time and 20 Breathing Cannulas.


H2 Purity: 
99.9999% O2 Purity: 99.9999RP Purity: Plasma Fields of 24K subatomic Gold and Quartz Crystals 

H2 Output flow and pressure display.
High pressure protection.
Low water protection.
Water level display.

H2 output flow is fixed.
CE Certified.

Power and Voltage: 110V, 220V, or as specified. 50-60 Hz (according to your specification)

Fluctuation Rate of Output Pressure: < 0.001 MPa

Water Consumption: 1 Gal. water produces 5.8 Gal. of H2, will go 7-10 days before adding more water.

 

Water Requirement: Only use the Dionized or Double Distilled Water (if you have your own water distiller, run the same water twice). 

Note: The water used within the unit generates the ARP Tech Bio Activated H2 or O2 Gas, via Electrolysis, SPE/PEM and ARP Tech; however, this is not the water that you use for drinking. You will use a separate water tube, not the breathing cannula in order to insert into a separate holding vessel filled with the purified drinking water, tea or watery consistency herbal elixirs or oils with the Plasma Bio Activated H2 or O2 Gas.

Weight: 110 lbs. Packaged in a wooden crate.

Delivery: Approximately 10-14 days after receiving the order.

Warranty: 12 months

Why we do not offer longer Warranty? 

We had many instances when people would overrun the machine without giving it any rest  and we decided that giving too long of a Warranty is too risky for us. However, we must say that our machines are care free and amazingly built to last, an that if there is ever a problem we do our best to troubleshoot with our customer through our qualified technicians. In many years of providing this service we have had only success and satisfied customers. So please do not be concerned about the Warranty. It is very likely that we won't ever hear from you running into any problems with the machine, as long as you follow the correct use, according to our Manual.

GO BACK to Breath of Health™ ARP 1000